# Access L3STAT counters from software

**URL:** <https://discourse.grlib.community/t/access-l3stat-counters-from-software/283>\
**Category:** General - Software\
**Created:** [15 November 2022 15:02 UTC](https://discourse.grlib.community/t/access-l3stat-counters-from-software/283 "2022-11-15T15:02:13Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![MarcSB](https://avatars.discourse-cdn.com/v4/letter/m/bbe5ce/32.png) [@MarcSB](https://discourse.grlib.community/u/MarcSB)\
**Post date:** [15 November 2022 15:02 UTC](https://discourse.grlib.community/t/access-l3stat-counters-from-software/283/1 "2022-11-15T15:02:13Z")

</div>

Hello,

I am trying to access the L3STAT counters in a LEON3 design. I have seen, using GRMON’s `info sys`, the memory addresses where the values of the counters are stored, but I couldn’t find at what memory address (if any) is the counter configuration.  
Is there any way to set those through software when not using GRMON?

Thanks in advance for your help!

Marc

---

<div class="post-metadata">

**Author:** ![MarcSB](https://avatars.discourse-cdn.com/v4/letter/m/bbe5ce/32.png) [@MarcSB](https://discourse.grlib.community/u/MarcSB)\
**Post date:** [16 November 2022 14:16 UTC](https://discourse.grlib.community/t/access-l3stat-counters-from-software/283/2 "2022-11-16T14:16:27Z")

</div>

Hi everyone,  
I already found the solution to my question.  
The configuration address is the L3STAT address reported by `info sys` + 0x100

Marc